Side by Side Raincover Fit: GB, Peg Perego and My Babiie
By For Your Little One | Published: 2026-11-01
Category: How-to Guides
Fit a side by side raincover correctly on GB, Peg Perego and My Babiie double pushchairs. Follow these steps to avoid gaps, trapped straps and fogged windows.
Quick answer
Start by matching the raincover to your exact pushchair model, then work from the foot end upward, securing the front hem before stretching the cover over the canopies. Always check that harness straps and wheels are not trapped and that both seats have clear ventilation.
Why model-specific fit matters more on side-by-side pushchairs
Side-by-side double pushchairs have a wider footprint and often different canopy shapes than single strollers. A cover that is merely 'universal' can leave gaps at the centre joint or pull too tight across one seat, letting rain run down the inside. The three covers here are cut for specific brands, so the seams and elasticated edges follow the frame rather than fighting it.
The 250-micron PVC used across these covers is thick enough to stay put in wind but still flexible enough to stretch over canopies. That thickness also means you should not force a cover that is clearly the wrong shape—stretching it too far can stress the seams and reduce visibility through the window.
When a brand-specific cover still needs adjustment
Even a correctly matched cover can fit loosely if your pushchair has accessories fitted, such as a bumper bar, footmuff or cup holder. Remove bulky accessories before fitting, then reattach them only if the cover still sits flush. If you use a double raincover over a footmuff, check that the cover does not compress the footmuff's loft, which can reduce warmth.
On very windy days, the front hem can lift. A cover with a deeper skirt or elasticated front will resist this better, but no cover replaces common sense: avoid exposing the pushchair to strong gusts where the cover could act like a sail.
Step-by-step fitting for a side by side raincover
- Confirm the cover matches your pushchair brand and model: Check the label or product page against your pushchair's brand and model. For example, use the Peg Perego-specific cover only on a Peg Perego double. Common mistake: assuming all side-by-side covers are interchangeable—they are not, and a loose fit lets rain in. If you own two different brands, buy two covers rather than stretching one.
- Remove bulky accessories and empty the basket: Take off bumper bars, cup holders and any clip-on toys before fitting. A cluttered frame prevents the cover from sitting flush. Common mistake: leaving a footmuff attached that is thicker than the cover allows, which creates gaps at the sides. Reattach accessories only after the cover is fully secured and still lies flat.
- Drape the cover from the foot end first: Unfold the cover and position the foot end over the front of both seats, aligning any elasticated corners with the frame. Then pull the cover up and over the canopies. Common mistake: starting at the handle end, which traps air and makes the cover balloon. Work from front to back so trapped air can escape at the handle end.
- Secure the front hem and side edges: Hook or tuck the front hem under the footrest area, then smooth the sides down so the cover follows the frame contours. Common mistake: leaving the front hem loose, which lets wind lift the cover and rain run onto the footmuff. A taut front hem is your first defence against wind-driven rain.
- Check harness straps and wheels are not trapped: Reach inside and confirm both children's harness straps hang free and are not caught under the cover. Spin the wheels to ensure the cover does not rub. Common mistake: trapping a strap in the cover's edge, which can pull the harness tight or tear the cover. If a strap is trapped, unfasten the cover side, reposition and re-secure.
- Adjust the canopy position for ventilation: Open or close the canopies as needed so the cover's window aligns with your child's view and air can circulate. Common mistake: sealing both canopies fully shut, which can cause condensation and a stuffy ride. In heavy rain, leave a small gap at the rear of the canopy if your pushchair allows it.
- Do a final walk-around check: Walk around the pushchair and look for any gaps at the centre joint, sides or handle end. Tug gently on the cover to confirm it is secure. Common mistake: skipping this check and discovering a gap only when it starts raining. A 30-second check before you leave home saves a wet ride later.
Product facts
- Side by Side Raincover Compatible with Peg Perego: Designed specifically for Peg Perego pushchairs and made from 250-micron PVC. The model-specific cut means the cover follows the Peg Perego frame closely, reducing the chance of gaps at the centre or over the canopies.
Side by Side Raincover Compatible with Peg Perego - Side by Side Raincover Compatible with My Babiie: Transparent 250-micron PVC construction for My Babiie pushchairs. Children can still see out while staying dry, which helps reduce fuss on wet walks.
Side by Side Raincover Compatible with My Babiie - Side by Side Raincover Compatible with GB: Compatible with GB pushchairs and made from finest-grade 250-micron PVC. The durable material resists tearing when stretched over the GB frame, so the cover stays usable through repeated wet-weather outings.
